Follow 
Explore our high-purity zirconia powders, engineered ceramic media, and structural components synthesized for demanding industrial applications.
As the global electronics ecosystem accelerates toward sub-nanometer semiconductor manufacturing, high-frequency 5G/6G telecommunications, solid-state energy storage, and ultra-precise micro-electromechanical systems (MEMS), the demand for high-reliability electronic parts, structural ceramic substrates, and chemical-mechanical processing media has undergone a profound transformation.
Modern electronic hardware relies not only on active silicon and wide-bandgap semiconductors (such as SiC and GaN) but also on the ultra-pure ceramic matrices, insulating dielectrics, precision bearing elements, and ultra-fine dispersion media that enable their production. As a leading Electronic Parts Store Factory & Exporter, Pingxiang Baitian (Ball-tec) New Materials Co., Ltd. bridges raw material synthesis with nanoscale fabrication, establishing a comprehensive OEM/ODM supply hub for Tier-1 technology integrators worldwide.
Achieving extreme mechanical hardness, thermal shock endurance, and superior electrical insulation requires strict control over raw material chemistry and sintering kinetics. Our technological roadmap focuses on three key pillars:
Utilizing co-precipitation and hydrothermal synthesis, our 3mol% Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) achieves sub-micron grain structures (<0.3 µm). This micro-refinement eliminates micro-cracking and delivers fracture toughness exceeding 8.0 MPa·m¹/².
Electronic-grade passive components (MLCCs, inductors, thermal varistors) demand contamination-free slurry preparation. Our 99.99% high-purity alumina (Al₂O₃) and high-density YSZ beads prevent cross-metallic impurity injection during high-energy bead milling.
Engineering Silicon Nitride (Si₃N₃) and Zirconia (ZrO₂) bearing spheres according to ISO 3290 Grade 3 and Grade 5 specifications. These components exhibit friction coefficients below 0.002, enabling low-noise operation in robotic joints and high-RPM electric motors.
| Material Type | Density (g/cm³) | Vickers Hardness (HV10) | Flexural Strength (MPa) | Dielectric Strength (kV/mm) | Target Electronic Applications |
|---|---|---|---|---|---|
| Y-TZP Zirconia | ≥ 6.02 | 1250 - 1350 | 1100 - 1400 | 25.0 | Semiconductor CMP, MLCC Milling, Dental Blocks |
| 99.99% Alumina (4N) | 3.92 - 3.96 | 1600 - 1750 | 380 - 450 | 30.0 | Substrate Insulators, Battery Slurry Processing |
| ZTA (Zirconia Toughened Alumina) | 4.10 - 4.35 | 1450 - 1550 | 600 - 800 | 22.0 | Structural Hardware, Wear Components |
| Silicon Nitride (Si3N4) | 3.25 | 1500 - 1700 | 850 - 1000 | 18.0 | G3 High-Speed Precision Bearings, EV Motors |
Precision electronic parts and technical ceramic solutions supplied by our factory are deployed across five critical high-tech manufacturing ecosystems:
In chemical-mechanical planarization (CMP) slurries for silicon, silicon carbide (SiC), and gallium nitride (GaN) wafers, oversized media particles cause micro-scratches that ruin semiconductor yields. Our sub-millimeter Y-TZP beads (down to 0.05mm) provide ultra-narrow particle size distribution, ensuring pristine wafer flatness.
Next-generation battery cathodes (LFP, NMC) and solid-state sulfide/oxide electrolytes require nanoscale dispersion to maximize ionic conductivity. Our high-density ZrO2 grinding spheres eliminate iron contamination while reducing slurry viscosity during continuous attrition milling.
High-purity alumina powders and zirconia-toughened substrates serve as low-loss dielectrics for RF power amplifiers, radar sensors, and satellite transceiver modules, maintaining low dielectric dissipation factors (tan δ < 0.0002) at millimeter-wave frequencies.
Synthetic 4A, 5A, and 13X zeolite molecular sieves, along with ceramic corrugated tower packings, act as moisture and volatile organic compound (VOC) adsorbers in cleanroom air handling systems and bulk gas purification pipelines (nitrogen, argon, silane).
Ceramic bearing balls made from chrome steel, 304/316 stainless steel, silicon nitride, and zirconia prevent electrical fluting in electric vehicle drive units, robotic servo motors, and aerospace actuators under vacuum or unlubricated environments.
Global electronics manufacturers face growing challenges regarding lead-time volatility, raw material price spikes, and strict quality compliance. Located in the Pingxiang Industrial Park—one of the world's premier industrial ceramic and chemical equipment manufacturing clusters—Baitian (Ball-tec) provides robust supply chain guarantees:
From raw powder calcination, wet jet milling, atomizing spray drying, isostatic pressing, to high-temperature tunnel kiln sintering and laser sorting—every step is executed under one unified quality management system.
Every export lot is assigned a unique digital certificate of analysis (COA). X-ray diffraction (XRD), scanning electron microscopy (SEM), and inductively coupled plasma mass spectrometry (ICP-MS) verify chemical composition and structural integrity.
By eliminating middleman distributor markups and controlling energy-efficient sintering cycles, our direct-to-buyer model yields a 20% to 35% cost reduction without compromising precision performance parameters.
Equipped with vacuum moisture-proof packaging, heavy-duty export steel drums, and ISPM-15 compliant heat-treated wooden crates, supporting ocean freight, air express, and multimodal rail dispatch to over 80 countries.
We work directly with international engineering teams, university laboratories, and purchasing managers to streamline component qualification and integration:
All products strictly conform to EU REACH, RoHS 3.0, FDA compliance for bio-ceramics, and ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 management systems.
Customization available for non-standard sphere diameters (0.03mm micro-beads up to 60mm grinding balls), specialized dopants (CeO2 stabilization, alumina-toughened formulas), and tailored packing shapes.
Access our materials lab for wear rate simulation, mill loading ratio optimization, slurry compatibility testing, and worn media diagnostic analyses to maximize continuous operation uptime.
Comprehensive technical guidance to assist your material selection and procurement processes.
Browse our complete catalog of bearing spheres, molecular sieves, chemical tower packings, and specialized grinding media.
